The Wagner Temp Spray H326 provides the benefits temperature control offers. Heated systems improve spray and coating properties, even when spraying highly viscous materials. This helps reduce material consumption with low overspray and much more besides.
To make coating materials sprayable they may have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses
can be increased. Plus constant paint temperatures help to achieve constant application techniques even at low outside temperatures
The answer to the VOC guidelines: The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials.
H326 specification
Voltage 230v/50Hz
Heating Power 1300w
Mains Lead 4m
Hose DN10 (3/8") 30m PU Sheath
Max. Pressure 3625PSI/25MPa
Temperature Regulation 20° – 60°
Weight 23kg
To make coating materials sprayable they may have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses
can be increased. Plus constant paint temperatures help to achieve constant application techniques even at low outside temperatures
The answer to the VOC guidelines: The coating material can be set to the spraying viscosity without being diluted. This is of particular benefit especially for higher viscosity materials.
H326 specification
Voltage 230v/50Hz
Heating Power 1300w
Mains Lead 4m
Hose DN10 (3/8") 30m PU Sheath
Max. Pressure 3625PSI/25MPa
Temperature Regulation 20° – 60°
Weight 23kg
Copyright © 2018 Spray Equipment. All rights Reserved.
