• 10ltr capacity
• MWP 60psi / 4Bar
• Lever valves for air
• Pressure regulator
• Pressure gauge
• Safety blow off air valve
• Air driven agitation
• Air release valve
• ATEx rated, CE & TUV approved
• Weight 17.0Kg
• Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 & 20 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve. Recommended good working practice is to operate up to a maximum pressure that is 10psi / 0.7Bar less than the technical maximum pressure.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
• MWP 60psi / 4Bar
• Lever valves for air
• Pressure regulator
• Pressure gauge
• Safety blow off air valve
• Air driven agitation
• Air release valve
• ATEx rated, CE & TUV approved
• Weight 17.0Kg
• Indicated earth point, earth lead and spanner included
We have a pressure feed tanks to suit all requirements, sizes from 2 litre to 60 litre, some with a choice of either manual or pneumatic agitation, and the option (on 10 & 20 litre models) of a bottom feed to suit heavy coatings. These are ideal for a production environment or where ever a large surface area needs coating to a high standard quick time. All of our pressure feed tanks are supplied ready to use complete with pressure gauge, air regulator, safety valve and air & material valves, top feed models are also supplied with a material strainer, we can also supply complete with both air and fluid lines ranging from 5m to 20m and a choice of pressure fed spray guns.
Important points regarding pressure tanks.
The maximum working pressure is governed by a mechanical safety valve. Recommended good working practice is to operate up to a maximum pressure that is 10psi / 0.7Bar less than the technical maximum pressure.
Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.
Copyright © 2018 Spray Equipment. All rights Reserved.
